Product Description
Rack Type Lithium Iron Phosphate Battery for Home Solar Energy Storage System
Features:
- High safety: Lithium iron phosphate has stable chemical properties and good thermal stability.
It is not prone to combustion or explosion under conditions such as overcharging, overdischarging, and short circuits.
Its safety is superior to that of other lithium batteries.
- Long cycle life: It can be cycled for charging and discharging many times. Usually, it can reach more than 2,000 cycles, and some high-quality products can even reach more than 5,000 cycles, reducing the usage cost.
- Relatively high energy density: While ensuring safety and cycle life, it has a relatively high energy density and can store more electrical energy within a smaller volume and weight, saving installation space.
- Low self-discharge rate: When fully charged and left for a long time, the power loss is small, which is convenient for backup power application scenarios and can provide electrical energy at any time.
- Environmentally friendly: It does not contain toxic and harmful substances, is friendly to the environment, meets environmental protection requirements, and is relatively simple to handle after being discarded.
- Stable voltage platform: The voltage change is stable during the discharging process, providing stable power support for loads and protecting electrical equipment.
Examples of specification parameters: - Voltage: Commonly seen are 25.6V 48V, 51.2V, etc.
- Capacity: There are different specifications such as 100Ah, 200Ah, etc., which can be selected according to household electricity demand.
Application scenarios:
- Household solar energy storage: It stores the surplus electrical energy generated by solar panels for households to use at night or on rainy days.
- Emergency backup power: When the power grid fails, it serves as a backup power source to supply power to important household electrical equipment such as lighting, refrigerators, routers, etc.
Installation and usage precautions:
- Installation: Install it in an indoor environment that is dry, well-ventilated, and away from direct sunlight.
Keep it away from fire sources and flammable materials.
Install it in a dedicated battery rack or cabinet to ensure stability and facilitate heat dissipation and maintenance.
- Usage: Avoid deep discharging of the battery and set a reasonable discharge cut-off voltage. Regularly inspect the battery pack to check whether there is bulging, leakage, or whether the connecting wires are loose or corroded, etc.
Follow the battery charging and discharging management requirements and use the original or compatible chargers and controllers.
Product Parameters
| Model |
GBP24-100R |
GBP24-200R |
GBP48-100R |
GBP48-200R |
GBP51.2-100R |
GBP51.2-200R |
| Nominal voltage(V) |
25.6 |
25.6 |
48 |
48 |
51.2 |
51.2 |
| Nominal capacity(Ah) |
100 |
200 |
100 |
200 |
100 |
200 |
| Nominal energy capacity(KWh) |
2.56 |
5.12 |
4.8 |
9.6 |
5.12 |
10.24 |
| Operating voltage range(V) |
22.4~29.2 |
42~54.75 |
44.8~58.4 |
| Recommended charging voltage(V) |
27.6 |
51.75 |
55.2 |
Recommended discharge
cut-off voltage(V) |
24 |
45 |
48 |
| Standard charging/discharging current(A) |
0.5C |
0.5C |
0.5C |
0.5C |
0.5C |
0.5C |
| Maximum continuous charging/discharging current(A) |
1C (Customizable) |
| Applicable temperature(C) |
-30 ~ 60 (Recommended 10~35) |
| Storage temperature |
-20 ~ 65 (Recommended 10~35) |
| Protection level |
IP20 |
| Life cycles |
5000+ times at 80% DOD |
| Cooling method |
Nature air cooling / intelligent fan |
| Maximum size (D*W*H) mm |
689*495*162 |
689*495*162 |
689*495*162 |
682*510*246 |
689*495*162 |
682*510*246 |
| Weight (kg) |
28 |
49 |
46 |
89 |
49 |
93 |
Application
Rack Type Lithium Iron Phosphate Battery is an important part of Home Solar Energy Storage System
Introduction of Solar - powered Household Energy Storage System
The solar - powered household energy storage system is an innovative energy - solving solution, which mainly consists of solar panels, energy - storage batteries, inverters and charge controllers.
Solar panels are responsible for collecting solar energy and converting it into direct current. These panels are usually installed on the roof or in sunny areas around the house. Their conversion efficiency varies depending on materials and technologies. However, modern high - quality panels can effectively capture solar energy.
Energy - storage batteries are the key components of the system and are used to store the electrical energy generated by solar panels. Common energy - storage batteries include lead - acid batteries and lithium - ion batteries. Lithium - ion batteries are widely used in many high - end systems due to their high energy density, long lifespan and low self - discharge rate. The energy - storage batteries can store the excess electrical energy generated by solar panels during the day so as to provide power for households at night or when there is insufficient sunlight.
The inverter is a device that converts the direct current in the energy - storage batteries into alternating current. Since most household electrical appliances use alternating current, the inverter enables the stored electrical energy to be compatible with household electrical equipment such as televisions, refrigerators and washing machines.
The charge controller is mainly used to manage and control the charging process of the energy - storage batteries by solar panels. It can prevent the batteries from over - charging and over - discharging, extend the service life of the batteries and optimize the charging efficiency at the same time.
The solar - powered household energy storage system can make households more independent of the traditional power grid and provide backup power in case of power outages or grid failures. Moreover, it helps to reduce households' dependence on traditional fossil fuels, cut energy costs and also makes a positive contribution to environmental protection, because solar energy is a clean and renewable energy.
5 KW Off Grid Solar System(Wall mount lithium battery)
System configuration:
1.Solar panel 550Watt * 6-8pcs, including Mounting brackets
-Top brand LONGi half cell Hi-MO series 550W Solar panel.
-Based on M10 wafer, best choice for ultra-large power plants.
-Advanced module technology delivers superior module efficiency.
-Excellent outdoor power generation performance.
-High module quality ensures long-term reliability.
2.Bracket for solar panel installation
Optional ground or roof mounting
3. This series of products is an all-in-one machine that integrates hybrid inverters and energy storage batteries.
Multiple application modes; Beautiful appearance, flexible mobility, and circular arc design are widely used in small commercial and home energy storage.
4. PV cable and connectors for system
PV cable-
1),2pcs 16mm2*2M battery cable
2),4mm2 PVcable 100M
3),1P 63A Battery switch and box
Battery switch and box
Application Cases:
Packaging & Shipping
Package for shipping:
Audited Supplier 
){kind=link}