|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | Shipping, Parts Replacement, and Even Whole Produc |
| Warranty: | 5 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Flexible Thin Film CIGS Solar Panel with Adhensive for RV Roof 500W 510W 520W
Technology
Our flexible solar panel adopts CIGS technology, which has an aperature efficiency as high as 17%, rivaling that of rigid glass panels.
General production process
We begin with high-grade stainless steel foil and use an advanced semiconductor deposition process, PVD, to produce the most controlled, stable, and powerful flexible stainless steel CIGS cell in the world. Once the cell structure is deposited on the foil, special transparent conductive oxides are applied, and a specialized plastic-cell interconnect mesh-wire system is laminated to the cell, which is in turn protected by special water barrier plastics. The transparent water barrier is key to the longevity of the Flexi module series. The special plastic backsheet has an internal aluminum film to prevent water transmission from eroding the powerful stainless steel CIGS cells.

Benefits:
-Light weight:
Less than 2.4 kg/m(<0.5 lb/ft). Because flexible solar modules are so much lighter than heavy rigid silicon panels mounted with racks, they are best solution for building structures with low dead load and environmental load limitations(such as snow).
The modules are also ideal for other structures, such as autos, trucks, and RVs, that are not constructed to support the weight of traditional solar panels.
-Powerful:
Flex modules are the highest efficiency flexible thin-film CIGS modules in production today, with aperature efficiencies as high as 17%, providing over four times the power generation per kilogram of silicon.
-Easy to install:
Flexible solar modules are peel-and-stick application. This eliminates penetrations into the structure, reducing the chance of leaks.
Peel-and-stick application also allows for installation on surfaces such as autos, trucks and RVs where racks would not feasible, and lowers the balance-of-systems (BOS) costs and complexity when mounting FLEX modules on rooftops.
-Flexible:
FLEX modules conform to curved surfaces, enabling solar power generation on surfaces not suited to traditional rigid silicon panels.
-Resistant to Natural Disasters:
Flexible solar modules are thin (2.5mm) and adhere directly to surfaces, providing excellent wind and seismic resistance.
The modules are also shatterproof, and won't break if struck by debris.
-Reliable:
Flex solar modules' unique redundant interconnect design enables industry-leading reliability.
KEY FEATURES-FLEX Series Modules:
-Record efficiency levels in a flexible form factor
-Low installed weight at less than 2.4 kg/m2(<0.5lb/ft )
-No penetrations, ballast or racking required
-Applicable for high wind load and high seismic hazard areas
-Bypass diodes reduce PV system shading losses
-Directly bonds to many approved surfaces
WARRANTY:
-5 year workmanship
-10/25 year warranty against power loss
ELECTRICAL AND MECHANICAL DATA:
| Capacity rating | Pmax | 500W |
| Tolerance of Pmax | % | +10 / -0% |
| Module aperture area efficiency | % | 16.4% |
| Maximum Power Voltage | Vmpp | 62.4V |
| Maximum Power Current | Impp | 8.03A |
| Open circuit voltage | Voc | 77.2V |
| Short circuit current | Isc | 9.07A |
| Model Numbers | FLEX-03W-2.6M SERIES |
| Length | 2583mm |
| Width | 1292mm |
| Thickness, Maximum at J-Box* | 17mm |
| Weight (Module without adhesive) | 5.5 kg |
| Weight (Module with adhesive) | 6.6 kg |
| Weight/Area (Module without adhesive) | 1.7 kg/m2 |
| Weight/Area (Module with adhesive) | 2.0 kg/m2 |
| Junction Box Type | IP68 |
| Cable connections | MC4 Compatible |
| Cell type | Copper Indium Ga Diselenide (CIGS) |
PROJECT PHOTOS FOR 500W Thin Film Flexible Solar Panel PV Laminate:








Solar FAQ:
1. Are you a trader or manufacturer?
A: We are a professional solar panel manufacturer with 30 years of experience in Zibo, offering OEM services.
2. What are your main product lines?
A: We specialize in Flexible solar panels ranging from 40W to over 550W, we also ca high-efficiency semi-flexible solar panels, folding solar panels, Hybrid inverter,lithium batteries,street light and others.
3. How about your after-sale service?
A: We offer 24-hour after-sale service supported by a professional team. Contact us via email, Made in China, phone, or WhatsApp for assistance.
4. How do you guarantee product quality?
A: We always provide a pre-production sample for approval before mass production;
Every product undergoes thorough testing before shipment.
5. What is your delivery time?
A: Sample orders typically ship within 15 working days, while bulk orders take 30-45 working days.
6. What if my order quantity does not meet your MOQ?
A: Click 'Contact Now' to reach out to us.
7. Can we print our company's logo on the PV panels?
A: Yes! We accept OEM & ODM orders.
Designed and packed according to customer requirements.
OUR SERVICE
Pre-Sales Service:
1.Inquiry and consulting support.
2.Quick response with detailed quotation.
3.Confirm price, quantity, shipment, lead time and payment terms.
4.Make order and sealed PI.
5.Welcome to view our factory at any time.
6.OEM is welcomed.
Professional After-Sales Engineers
1.One Year guarantee, lifetime maintenance free
2. Product training, installation and operation guidance and after-sales problem handling
3.Guarantee a continuous supply of accessories.
4. In 2 hours reply online services through Whatsapp, Skype, Email or on the phone.